Preparing your materials is an important first step whenever you are beginning a new quilt. You wouldn't start a brand new job in mucky clothes, so why should your quilt be any different?
To get your quilt off to the best possible start, I have listed my pre-flight quilting checklist.
Read Any Instrutions
This is the most important step before anything else, I learned this the difficult way - which I will tell you about later on.
The instructions will give you information about anything which will damage or affect the materials in the preparation process, so make sure you read all of the directions so you do not get caught out.
Washing
After you have read the instructions, your next stop is to clean the quilt. The instructions will let you know whether its safe to put in the machine or whether you need to hand wash it, as well as the temperature of water to use.
I was recently working on a green quilt design and did not go over the directions. As it seems, the actual dye they used for this material doesn't handle warm water very well and the colours ran and faded in areas, so be alert and check!
Drying
Drying is one of the things that surprises numerous quilters. Some material does not react well to being put in bright sunlight shortly after washing.
More usually, there are more materials which will get damaged if you put them into a dryer, so take care that you know what you are dealing with.
Ironing
Like drying, ironing is another step in which you can ruin a supremely good fabric. Materials like silk and polyester will burn or melt if you use an iron that is too hot.
There are too many materials to cover here, so in short if you are uncertain, put your iron on the lowest setting simply to be safe.
When you are ironing, start from the center and push your iron out to the edges. Once the material is flat, run your iron over the edges to eliminate any tiny wrinkles and make ready for sewing seams.
If you follow these steps, your material will be prepped and ready to be used in any quilt, removing any possible issues with the fabric itself.
To get your quilt off to the best possible start, I have listed my pre-flight quilting checklist.
Read Any Instrutions
This is the most important step before anything else, I learned this the difficult way - which I will tell you about later on.
The instructions will give you information about anything which will damage or affect the materials in the preparation process, so make sure you read all of the directions so you do not get caught out.
Washing
After you have read the instructions, your next stop is to clean the quilt. The instructions will let you know whether its safe to put in the machine or whether you need to hand wash it, as well as the temperature of water to use.
I was recently working on a green quilt design and did not go over the directions. As it seems, the actual dye they used for this material doesn't handle warm water very well and the colours ran and faded in areas, so be alert and check!
Drying
Drying is one of the things that surprises numerous quilters. Some material does not react well to being put in bright sunlight shortly after washing.
More usually, there are more materials which will get damaged if you put them into a dryer, so take care that you know what you are dealing with.
Ironing
Like drying, ironing is another step in which you can ruin a supremely good fabric. Materials like silk and polyester will burn or melt if you use an iron that is too hot.
There are too many materials to cover here, so in short if you are uncertain, put your iron on the lowest setting simply to be safe.
When you are ironing, start from the center and push your iron out to the edges. Once the material is flat, run your iron over the edges to eliminate any tiny wrinkles and make ready for sewing seams.
If you follow these steps, your material will be prepped and ready to be used in any quilt, removing any possible issues with the fabric itself.
About the Author:
Interested in more green quilt design ideas? Then head on over to Jane Green's how to make a patchwork quilt site now!
No comments:
Post a Comment