One of the most artistic techniques that is used for creative image design and inscription of symbols is glass carving. It has been in use for centuries. One particular technique used with it is sand-carving that was first utilized in the late 19th century. It was, and is still being used for creating multilevel abrasive etchings. Once the required designs have been etched into the glasses, light and shadow details are added. In consideration of glass carving Alberta offers one of the best options.
When carving glasses, there are 3 main things that are required; etching cream that is acid based, foam brush and stencil. To begin with, the glass piece is placed on a surface that is flat then it gets sprayed with an appropriate cleaner. In order that the etching cream may properly adhere to the surface it is being carved on, the surface has to be very clean and dry.
When the surface has been cleaned well, wiping is done using soft cloth so that it remains dry before the procedure is continued. The design that is to get carved is then chosen. Most experts of the arts and crafts advise that one uses stencil, simply because it comes with already existing designs. Some stencils have the added advantage of coming with adhesive backing to make the stick completely to surfaces.
For the sake of safety, people are advised to put on both goggles and latex gloves. This is because fumes that are coming from the cream may be very strong and thus have adverse health effects. The goggles are particularly useful for people that have eye sensitivity. Gloves are helpful for all people, and especially those that are allergic to latex.
There should be application of latex towards the edges of the stencil, especially so at the places where they meet glass. This is used for protecting sections that are intended to get carved. If such sections were to be left uncovered and they come into contact with the cream, chances are that the design will be ruined. After the cream is placed on the foam brush, the brush is used to even out the application. Watching the corners and edges ensures that all sections are covered by the cream.
The cream is removed from the glass for every 10 to 20 minutes that have elapsed for each direction that came with it. Any excess cream is wiped with paper towels and the hands properly washed before gloves are taken off. Doing so ensures no traces are left.
There are many persons that have appreciation for carved glass. Most of the carvings can be seen in shops selling gifts and in fancy windows. There are not so many people that deal in these carvings, which is why it is a business that has potential to be highly profitable.
In considering the business of glass carving Alberta business people would need three main things. These are resists, blast cabinet and a well lit studio. It is a business that is profitable if the right marketing is done. Marketing is done by creating brochures, making a website and even setting booths at local events.
When carving glasses, there are 3 main things that are required; etching cream that is acid based, foam brush and stencil. To begin with, the glass piece is placed on a surface that is flat then it gets sprayed with an appropriate cleaner. In order that the etching cream may properly adhere to the surface it is being carved on, the surface has to be very clean and dry.
When the surface has been cleaned well, wiping is done using soft cloth so that it remains dry before the procedure is continued. The design that is to get carved is then chosen. Most experts of the arts and crafts advise that one uses stencil, simply because it comes with already existing designs. Some stencils have the added advantage of coming with adhesive backing to make the stick completely to surfaces.
For the sake of safety, people are advised to put on both goggles and latex gloves. This is because fumes that are coming from the cream may be very strong and thus have adverse health effects. The goggles are particularly useful for people that have eye sensitivity. Gloves are helpful for all people, and especially those that are allergic to latex.
There should be application of latex towards the edges of the stencil, especially so at the places where they meet glass. This is used for protecting sections that are intended to get carved. If such sections were to be left uncovered and they come into contact with the cream, chances are that the design will be ruined. After the cream is placed on the foam brush, the brush is used to even out the application. Watching the corners and edges ensures that all sections are covered by the cream.
The cream is removed from the glass for every 10 to 20 minutes that have elapsed for each direction that came with it. Any excess cream is wiped with paper towels and the hands properly washed before gloves are taken off. Doing so ensures no traces are left.
There are many persons that have appreciation for carved glass. Most of the carvings can be seen in shops selling gifts and in fancy windows. There are not so many people that deal in these carvings, which is why it is a business that has potential to be highly profitable.
In considering the business of glass carving Alberta business people would need three main things. These are resists, blast cabinet and a well lit studio. It is a business that is profitable if the right marketing is done. Marketing is done by creating brochures, making a website and even setting booths at local events.
About the Author:
You can visit the website www.claudegarneaustudio.ca for more helpful information about Procedures Involved In Glass Carving Alberta
No comments:
Post a Comment