Monday, 24 September 2018

Tricks To Use On Grandfather Clock Maintenance

By Angela Cole


Old timepieces require care from time to time for them to be reserved. It is suggested that they are maintained after two or three years of working so that they work well. As they are old, they definitely remind you of the good old memories you would want to cherish. In spite of this, they have a few challenges which should be taken care of. The mentioned are useful points on grandfather clock maintenance you can use.

You should always avoid hanging it near a heat source. This is because the high temperatures from heat will destroy the important parts. Due to this, avoid hanging the clock near fireplaces or windows where it will have contact with fire or the sun. You ought to also avoid hanging it in humid environments or damp places. This is because humid conditions may cause corrosion and damage parts as well.

There are parts that should not be directly cleaned with window cleaning products. A good example is the glass exterior. This is due to the damage that can be done to the shellac by alcohol which is in the product. The most effective way to do so is by spraying the product on a paper or towel before cleaning. The shellac finish of the watch is of high value and should not be destroyed.

If you notice that the watch is running at a slow speed, you can look inside it to confirm whether the oscillator is moving freely. To remove dust, use a blower which can quickly solve the problem. If not, look for a professional as most likely the problem is in the inner mechanism. If you choose to leave it, more damage can be done up to a point where you cannot save it.

The old piece requires to be oiled and serviced after a while. The oiling is dictated by its age, the environment where it was hanged, how the repair was previously done and the type. Take it to a professional who can oil it well. The reason for this is that the various parts in the inside require different makes of oil. Using only one make may make the issue worse.

If you want to shift locations with the watch, ensure it is well packed. As you may not know how to handle it, search for a technician to do the work. Once it is well packed, moving it like other furniture will be effortless. If you do so without packing it well, problems such as chains coming off the sprockets can be realized making the watch not to run. Hiring a technician is much cheaper when compared to repairing it after the damage is done.

When you see that the watch is not running and that the hands are not moving, it is time to reset it. You can do so by moving backwards the minute hand until you notice that the required time is displayed on the dial. After this, check on the possible cause so that you can take care of the problem once.

Old time antiques have very complex and customized mechanisms. Due to this, there are certain hitches which you will not be successful in fixing on your own. You, therefore, have to search for a technician who has the skills to carefully take out the parts and check them so as to solve the problem.




About the Author:



No comments:

Post a Comment