Metal powders can be used with real metal cold casting. This is the process where a metal powder is mixed with a resin until it becomes thick. This mixture is then brushed, or slush-cast, onto the mold surface, and then the resin is left to cure. Straight resin, or resin mixed with metal powder, is applied over the gel coat, and then the finished product is a casting that looks like real metal. The metal cold cast process is faster and substantially less expensive than molten metal casting at the foundry.
To achieve an aesthetic appearance on a casting, paints that are designed for just this purpose can be used. A good solution is Alumidust Metallic Powders; these can be either combined with the casting resin, or applied straight onto the mold with a brush.
Alumidust comes in small containers because only small amounts need to be used each time. They are also safe to use due to their non toxicity, which means they are much easier to use than other, more dangerous paints. Silicone rubber molds that are high gloss are great for giving the casting a bright look where the colors and patterns really stand out.
There are 28 separate metallic powder colors available that include copper, bronze, gold and pewter, as well as other hues and shades to suit any application. These powders are suitable for a myriad of different uses that anyone can create.
One common application of these powders is for dusting soft plastic fishing lures. Making soft plastic lures is much easier than making hard lures, which take a long time and require the use of air brushes and compressors, as well as excellent ventilation.
Soft plastic lures are generally dangerous to make because the paints involved are highly flammable. This can be avoided with Alumidust as a much easier and safer alternative. The steps are simple and first requires that the mold be dusted directly with the powders, rather than applying them onto the lure. The first color that is applied will always be the outermost color on the lure surface.
The next step is to heat up the soft plastic, and pour it into the mold. Then let it cool and set. To make the clear coat, heat up the clear plastic to a thin consistency, dip the lure into the mixture for a few seconds, then hold it by the tail and let the excess plastic drip off. Finally, let the finished lure cool and set completely, and it's done.
To achieve an aesthetic appearance on a casting, paints that are designed for just this purpose can be used. A good solution is Alumidust Metallic Powders; these can be either combined with the casting resin, or applied straight onto the mold with a brush.
Alumidust comes in small containers because only small amounts need to be used each time. They are also safe to use due to their non toxicity, which means they are much easier to use than other, more dangerous paints. Silicone rubber molds that are high gloss are great for giving the casting a bright look where the colors and patterns really stand out.
There are 28 separate metallic powder colors available that include copper, bronze, gold and pewter, as well as other hues and shades to suit any application. These powders are suitable for a myriad of different uses that anyone can create.
One common application of these powders is for dusting soft plastic fishing lures. Making soft plastic lures is much easier than making hard lures, which take a long time and require the use of air brushes and compressors, as well as excellent ventilation.
Soft plastic lures are generally dangerous to make because the paints involved are highly flammable. This can be avoided with Alumidust as a much easier and safer alternative. The steps are simple and first requires that the mold be dusted directly with the powders, rather than applying them onto the lure. The first color that is applied will always be the outermost color on the lure surface.
The next step is to heat up the soft plastic, and pour it into the mold. Then let it cool and set. To make the clear coat, heat up the clear plastic to a thin consistency, dip the lure into the mixture for a few seconds, then hold it by the tail and let the excess plastic drip off. Finally, let the finished lure cool and set completely, and it's done.
About the Author:
Our one-stop-shop sells metallic powders and many other mould casting materials. To order Mica powders, visit the official website of Aldax Store right away.
No comments:
Post a Comment